Time Zone Setting - TFA 60.2547 Bedienungsanleitung

TFA_No. 60.2547_Anleitung_12_21
Radio-controlled alarm clock
5.1.1 Setting of the time and date
• Press and hold the TIME button in normal mode for three seconds.
• 24H (default) will be flashing. Press the + or – button to choose 12 Hr
or 24 Hr system. In the 12-hour system AM or PM (after 12 o'clock)
appears on the display.
• Press the TIME button to make the settings in the following sequence:
The time zone (00 - default), the hours, the minutes, the month/day
sequence D/M or M/D (D/M - default), the year, the month, the day and
the weekday (GE - default). Press the + or – button to adjust it.
• Confirm the setting with the TIME button.
• The manually set time is overwritten once the DCF time signal is suc-
cessfully received.

5.1.1.1 Time zone setting

• You can make the time zone correction (+12/-12) in setting mode.
• The time zone correction is needed for countries where the DCF signal
can be received but the time zone is different from the DCF time (e.g.
+1=one hour plus).
26
18.12.2021 12:01 Uhr Seite 14
Radio-controlled alarm clock
5.1.1.2 Day-of-the week language
• You can set the day-of-the week language in setting mode: German (GE -
default), French (FR), Spanish (SP), Italian (IT), Dutch (DU), Danish (DA)
and English (EN).
5.1.2 Temperature unit setting
• Press the – button in normal mode to change between °C (Celsius) or
°F (Fahrenheit) as temperature units.
6. Alarm time setting
• Press and hold the ALARM button for three seconds to enter the setting
mode.
• and appear. 6:00 (default) or the last adjusted first or second
alarm time appear on the display.
• The hour digits (Alarm 1) flash.
• Press the + or – button to adjust the hours.
• Confirm the setting with the ALARM button.
• Set the minutes in the same way.
• Set the alarm time for the second alarm in the same way as the first
alarm time.
27