Functions Of The Buttons In The Normal View; Basic Settings - TFA 30.3039.IT Gebrauchsanweisung

FUNCTIONS OF THE BUTTONS IN THE NORMAL VIEW:

History / Delete
USB
SET
Alarm
OK / Max.Min.
Plus
Minus

BASIC SETTINGS:

In normal mode, press and hold the SET button for 3 seconds to enter
the manual setting mode for the following functions:
- LCD contrast
- Time zone
- Alarm sound ON/OFF
go to the history-mode of the recorded data sets
(single press)
initiate the contact with the known USB
transceiver
(press and hold for three seconds)
Synchronization to an USB transceiver
(single press)
go to the setting mode of the transmitter (Learn
mode).
With a further press you go to the record interval
setting.
(press and hold for three seconds)
go to the basic setting mode of the logger
(single press)
deactivate active alarm sound if an alarm is
happend
(press and hold for three seconds)
go to the alarm setting mode of the currently
displayed channel.
call up the Max.Min. values and the current dew
point of the selected channel
Scroll up through the available channels
Scroll down through the available channels
35