Max.min.-Values And Current Dew Point; Alarm-Setting Mode - TFA 30.3039.IT Gebrauchsanweisung

The recorded data sets can be called up in history mode or transferred to
MAX./MIN VALUES AND THE CURRENT DEW POINT in the selected
channel:

Press OK/MAX/MIN button in normal mode.

MAX appears in the display and the highest humidity is
displayed.

Press the button again.

The highest temperature is displayed.

Press OK/MAX/MIN button again.

MIN appears in the display and the lowest humidity is
displayed.

Press the button again.

The lowest temperature is displayed

Press the button again.

DEW appears in the display.

The current dew point is displayed.

The time and date when the respective value was determined
are also displayed.

The corresponding channel number is shown on the channel
display, and the assigned name or the serial number of an
entered transmitter is displayed.

To clear the recorded max.min.-values, please press and
hold OK/MAX/MIN button for three seconds in any mode.

The max./min. values will be deleted for all channels.

The display shows the current temperature and humidity at
all channels.
Max./min. values are not recorded in a data set.
Only the current max./min. values are displayed in the PC software.
ALARM SETTING MODE:

Press and hold the ALM button for the three seconds.

HIGH AL RH for the selected channel appears in the display.

The upper alarm limit for the humidity is flashing.

With the ALM button you can select one possible alarm limit
after the other:
a PC using the USB wireless transceiver.
Note:
41