Pc-Connection - TFA 30.3039.IT Gebrauchsanweisung


With the HIST / DEL or OK / MAX.MIN. button you can toggle
through the different AlarmEvent-records (if available).
If you press the "ALM" button again, you return to the position

of the last showing AlarmEvent data set in the normal
HISTORY MODE.
Press and hold the "HIST/DEL" or "OK/MAX.MIN." button for

fast forward scrolling through the data sets (steps of 50).

To enter normal mode again, press either SET button in
HISTORY-MODE or press no button for at least 2 minutes.
PC CONNECTION:
The required PC software can be downloaded free from the
download page of the TFA homepage (www.tfa-dostmann.de).
It must be distinguished between "synchronize" and "contact"
= push the wireless connection for transfer of new data
The KlimaLogg Pro can record up to 50,000 data sets and can also
transfer them to a PC using the included USB wireless transceiver
(Kat.Nr. 30.3175).
A ring memory is used. That means that when all data sets have been
written, the oldest existing data sets is automatically overwritten by the
next new data set. On the memory indication, the logger displays the
amount of data sets that has not yet been transferred to a PC (in
percentage).
Synchronisation:
The KlimaLogg Pro has a USB button. When the PC software requests
that synchronization be started, please press and hold the USB button
on the KlimaLogg Pro for three seconds until a brief beep is heard and
the USB symbol on the toolbar flashes. The synchronization must then
be confirmed in the PC software.
Please pay attention about pc-connection:
"Synchronize"
= introduce the hardware to each other
Note:
Note:
"Contact"
44