Operation; Putting Out Of Operation - Abicor Binzel BRS-CC Einbauanleitung

BRS-CC

7 Operation

NOTICE
• The BRS-CC maintenance station may only be operated by qualified personnel
• As the BRS-CC maintenance station is integrated into a welding system, the operating instructions of
• Make sure that the BRS-CC maintenance station is operated with a front sheet only.
1 Switch on the robot control.
2 Start the welding process.
3 Stop the welding process.

8 Putting out of operation

NOTICE
• When putting the system out of operation, ensure that the procedures for switching off each of the
1 Switch off the robot control.
(in Germany see TRBS 1203).
the welding components, such as welding torch and robot mount, must be observed during operation.
welding system components are observed.
7 Operation
EN - 19