Putting Into Operation - Abicor Binzel BRS-CC Einbauanleitung

6 Putting into operation

6 Putting into operation
The following instructions must be adhered to throughout all maintenance, servicing, assembly,
disassembly and repair work:
• Disconnect the power supply
• Interrupt the compressed-air supply.
NOTICE
• Please take note of the following instructions:
 2 Safety on page EN-3
• The system may only be installed and put into operation by qualified personnel
• Make sure that the cleaning process is not impaired by the collecting tray and the bottle holder.
1 Position 1
2 Clamping position P2
3 Position 3
Fig. 5 Putting into operation
EN - 12
DANGER
(in Germany see TRBS 1203).
1 2
9
8
7
6
4 Position 4
5 Position 5
6 Motor clamp
3 4
5
7 Lowest position (stroke down)
8 Distance sleeve
9 Gas nozzle
BRS-CC