Nameplate; Signs And Symbols Used En; Scope Of Delivery - Abicor Binzel BRS-CC Einbauanleitung

BRS-CC
Cutting capacity at 6 bar
Solid wire
Filler wire
Cutting time
Tab. 9 DAV wire cutting device (optional)
3.2 Abbreviations
BRS-CC Abbreviated name for the complete maintenance station (Connect Clean)
BRS-LC Cleaning station
VI Injection unit
DAV Wire cutting device
TCP Tool centre point
Tab. 10 Abbreviations
Unit of measurement in drawings or diagrams
Tab. 11 Dimensions

3.3 Nameplate

The BRS-CC maintenance station is labelled with a nameplate on the housing.
When making enquiries, please note the following information:
• Device type, device number, ID number, year of construction
3.4 Signs and symbols used
The following signs and symbols are used in the operating instructions:
Symbol Description
• Bullet symbol for instructions and lists

Cross reference symbol refers to detailed, supplementary or further information
1 Step(s) described in the text to be carried out in succession

4 Scope of delivery

• Fully assembled BRS-CC maintenance station
• Anti-spatter fluid (1 litre bottle)
• 1 distance sleeve for gas nozzles with nominal diameter up to
15.5 mm
• 1 distance sleeve for gas nozzles with nominal diameter up to
21mm
Tab. 12 Scope of delivery
NOTICE
• A clamping prism and a reamer are required as original equipment and to enable the functionality of
Order the equipment parts and wear parts separately.
The order data and ID numbers for the equipment parts and wear parts can be found in the current
catalogue. Contact details for advice and orders can be found online at www.binzel-abicor.com.
the maintenance station. They depend on the torch and gas nozzle geometry.
Up to 1.6 mm
Up to 3.2 mm
0.5 seconds
Millimetres [mm]
• Connection set with non-return valve
• Empty bottle
• 1 distance sleeve for gas nozzles with nominal diameters
from 16 mm to 19 mm
• Installation guide
4 Scope of delivery
EN - 7