Further Information; Energy Saving Tips - IARP EXCITE Gebrauchs- Und Bedienungs Anleitungen

Inhaltsverzeichnis

Verfügbare Sprachen

7.4 FURTHER INFORMATION

Take out packaging and clean all the cabinet using warm water together with 5% of neutral soap then dry it

with a soft cloth; for the glass parts only use specific products, avoiding the use of water which can leave on the

glasses limestone residues.

It is fundamental to comply with the distances indicated (cm) for correct installation of the equipment.

Ventilation openings must be kept unobstructed in order to allow the unit to work properly and for safety

reasons.

• Cabinet must be installed on a perfectly even surface, far away from any heat source (radiators, stoves, etc)

including sun rays.

• It is necessary that the capacitor unit is in the free air exchange condition, therefore the ventilation zones

must not be obstructed by boxes or otherwise.

• Install and position the unit in such a way so as to allow easy access to the power socket.

• Never place containers of liquid on or immediately above the ticket counter; should the content spill out, it

would damage the counter.

THE REFRIGERATOR IS NOT SUITABLE FOR WORKING IN DANGEROUS ENVIRONMENT WITH RISK OF FIRE,

EXPLOSIONS OR RADIATIONS.

Operation is regular with ambient temperature indicated on technical data plate.

• Install the appliance in a dry, well-ventilated room away from heat sources (radiator, cooking surface and so

on) and in a position out of direct sunlight.

• Follow the installation instructions to ensure adequate ventilation. Insufficient ventilation to the back of the

appliance causes an increase in energy consumption and reduces cooling efficiency.

• The internal temperature of the appliance depends on the room temperature, how often the doors are

opened and where the appliance is placed. These factors have to be taken into account when setting the

thermostat. Only open the doors when strictly necessary.

• Let hot food and drink cool down before placing them in the appliance.

• The positioning of the shelves in the fridge has no effect on energy efficiency.

• The fridge compartment light system uses a LED light, which at the same time ensures more efficient lighting

and reduced energy consumption.

-23-

Inhaltsverzeichnis