ECOVACS ROBOTICS WINBOT 880 Bedienungsanleitung Seite 12

3. Operating WINBOT
4
Start
Turn on Power Switch. Press Start/Pause Button. Attach the WINBOT
on the glass when hearing the fan working. WINBOT starts after it has
attached successfully to the glass.
Note:
Keep objects away from WINBOT's Fan to avoid blockage.
Place WINBOT on the window at least 10cm (4") from window corners
or other obstacles.
Clean an area to place WINBOT firstly if the glass with much dirty and
dust.
12
EN
3.3 Operating During Working
1
Select Cleaning Mode
a. AUTO Cleaning Mode
This is the most commonly used mode and is most suitable for regular
cleaning.
b. Deep Cleaning Mode
This mode can be used for a better cleaning performance as WINBOT
cleans in two directions separately.
OR