Assembling The Appliance - SOLIS 8454 Bedienungsanleitung

▲
A S S E M B LI N G TH E A PP L IANCE
1. Make sure that the power plug is not connected to the power socket.
2. Set the locking lever on the hinge of the press arm downwards (to the 6 o'clock
position), the press arm folds upwards.
3. Place the carrier over the drive shaft.
4. Place the juice collection tray over the carrier resp. the drive shaft of the motor
base. Make sure that the juice spout is placed in the half-round opening on the
front of the motor casing.
5. Place one of the two pulp sieves in the juice collection tray. The opening in the
centre of the pulp sieve and the juice collection tray consists of two rounded
ends and two straight edges. When inserting the pulp sieve, please make sure
that the straight edges and the rounded ends are lined up. Only then do the
two parts fit congruently into each other.
Juice collection tray
Caution: Please make sure that the stainless steel pulp sieve is inserted correct-
ly. Only then you can later install the juicing cone firmly on the carrier, making
the juicing cone spin on start up.
6. Now place the juicing cone on the carrier resp. the drive shaft, it slides down-
wards due to its weight.
7. To mount the pressing cone to the lever press arm, press
the connection piece of the pressing cone gently into the
fixture at the bottom of the lever. Turn the pressing cone
counterclockwise until it comes to a stop, so that the con-
nection piece is screwed into the fixture. Hint: If you want
to attach the dust cover as well, place the opening of the
cover over the connection piece of the pressing cone. The
noses of the connection piece must slide into the recesses
of the cover opening.
8. Place the drip tray in the appliance base.
9. Make sure that the spout is folded down, meaning it is in the correct position
for pouring juice.
10. The appliance is ready for use once you connect the power cord to a suitable
power socket and switch the appliance on with the ON/OFF switch.
Pulp sieve Pulp sieve in the juice
collection tray
➞
GB
67