Using The Product As Intended; Safety Notes; Important Notes; Function - Märklin 60882 Bedienungsanleitung

Using the product as intended

• The S88 DC feedback module is designed for connection
to the L88 (60883) and the 60213/60214/60215 Central
Stations (CS2) with Software Version 3.7.xx and higher.
• Connections for additional 60882 feedback modules.

Safety notes

• The voltage supply for the S88 DC is done by means of
L88 (60883).
• Connections to the S88 DC feedback module may only be
done with no voltage present.
• WARNING! Sharp edges and points required for operation.
• The housing is not to be opened.
• The S88 DC feedback module is designed only for use in
dry areas.

Important notes

• The operating instructions are a component part of the
product and must therefore be kept in a safe place as
well as included with the product, if the latter is given to
someone else.
• Please see your authorized Märklin dealer for repairs or
spare parts.
• The warranty card included with this product specifies
the warranty conditions.
• Disposing: www.maerklin.com/en/imprint.html
8

Function

The S88 DC decoder registers and stores whether there is
current flowing in the current sensor(s) connected to it.
There are 2 groups of 8 current sensors available on the S88
DC (1-8 and 9-16). This allows you to monitor track areas in
two different power circuits. The 16 current sensors can be
combined to a single power circuit.
Possible Applications for the Current Sensors:
• The current sensors can be used as contacts whereby
the contact location is supposed to be at least the length
of one locomotive.
• For monitoring a track area.