Step 6: Define Dimming Level; Step 7: Assign Settings To Scene; Complete Programming; Custom Layouts - OSRAM e:cue LIGHTDRIVE+ Installationsanleitung

reached the neutral point of this setting. In this case all LEDs are highlighted and a
beep sound is played.
You can also fine tune the effect speed with the jog wheel. The jog wheel al-
ways reflects the current effect speed (CW = faster, CCW = slower).
Proceed to the next step (6) by pressing the Jog-Wheel.
12.6

Step 6: Define dimming level

Select the dimming state for the current settings. The bars of the Scenes (1) indicate
eight dimming states: Scene 1 ... 8: 10% ... 100%. You can fine-tune the dimming
setting by using the Jog-Wheel (CW = increase brightness, CCW = decrease bright-
ness). Proceed to the next step (7) by pressing the Jog-Wheel.
12.7

Step 7: Assign settings to Scene

All Scene LEDs blink and you can save the current effect and settings to a Scene.
Touch the respective Scene button to save the Scene. After a signal sound the
LIGHTDRIVE+ returns to standard mode.
13

Complete programming

To use the digital inputs and solid-state relays of the LIGHTDRIVE+ use the LIGHT-
DRIVE+ Configurator running on a Windows® system. With this application you cre-
ate configuration files which are placed on the LIGHTDRIVE+'s USB storage. This
configuration includes all variable parameters like DMX minimum and maximum val-
ues for Zone B/C as well as assignment of digital inputs and relay outputs.
Download the LIGHTDRIVE+ Configurator from
www.ecue.com/download
The downloaded package includes the application and a user manual.
14

Custom layouts

The LIGHTDRIVE+ can be customized in various levels with customer-defined prints,
glass color, Jog Wheel color and symbols. For details please visit
www.ecue.com