Safety Instructions; General Safety Instructions; General Instructions; Firmware Version - OSRAM e:cue LIGHTDRIVE+ Installationsanleitung

Setup Manual - LIGHTDRIVE+
1

Safety instructions

1.1

General safety instructions

Read the included safety instructions carefully. If safety instruc-
i
tions are missing, please contact the support of OSRAM BU
Lighting Solutions & Systems to receive a new copy
The product may only be operated in the operating modes de-
!
scribed in the manual. All other applications are considered to be
inappropriate use. If the product is not used as intended, there is
no guarantee that it will operate safely.
2

General instructions

The Ethernet port of the LIGHTDRIVE+ is not designed for
i
inter-building connections. Use the LIGHTDRIVE+ only with
intra-building networks.
2.1

Firmware version

This manual is only valid for LIGHTDRIVEs+ with firmware version 1.1.6411 or later.
See chapter „15 Firmware update" how to check the firmware version and how to
upgrade. Visit www.ecue.com/download to get the recent firmware version for the
LIGHTDRIVE+.
This firmware version is not compatible to earlier versions. The DMX output may be
slightly different. The functionality of the LIGHTDRIVE+ does not change.
8