Source Menu; Pc Mode Menu System; Pc Position Menu - Schaub Lorenz LT22-356 DB Bedienungsanleitung

buttons move the selected programme to the decided
programme space and press the GREEN button again.
Delete
To delete a programme, press the YELLOW button. Pressing
the YELLOW button again erases the selected programme
from the programme list, and the following programmes
shift one line up.
APS (Auto Programming System)
When you press the BLUE button for starting automatic
tuning, Auto Programming System menu will appear
on the screen:
Press " " or " " button to select your country. If you want to exit
from A.P.S. function, press the BLUE button.
When you press OK or RED button for starting automatic
tuning, all stored programmes will be erased and the TV
will search for available channels. During the search, the
following OSD will be displayed:
Whenever you press the BLUE button, APS function stops
and Program Table appears on the screen.
If you wait until the end of APS, Program Table will be
displayed with the programmes found and located.

Source Menu

Press " " or " " button and select the sixth icon. Then
press " " or "OK" button. Source menu appears on the
screen:
02_MB45_[GB]_1055UK_IDTV_BRONZE11_22855W_10065354_50156390.indd 54 02_MB45_[GB]_1055UK_IDTV_BRONZE11_22855W_10065354_50156390.indd 54
In source menu, highlight a source by pressing " " or "
" button and switch to that mode by pressing " " button.
Source options are; TV , DTV , EXT-1 , FAV , HDMI , YPbPr
and PC-VGA .
Note : Once you have connected optional equipment systems to
your TV, you should select the required input to view pictures from
that source.
Note: YPbPr mode can be use only when you connect a device that
has a YPbPr output through the PC input with YPbPr to PC cable
(YPbPr cable is not supplied).

PC Mode Menu System

See "Connecting the LCD TV to a PC" section for connecting
a PC to the TV set.
For switching to PC source, press "AV/SOURCE" button on
your remote control and select PC input. You can also use
"Source" menu to switch to PC mode.
Note that PC mode menu settings are available only while the TV
is in PC source.

PC Position Menu

S e l e c t t h e f i r s t i c o n b y p r e s s i n g "
" " button. PC Position menu appears on the screen:
Autoposition
If you shift the picture horizontally or vertically to an
unwanted position, use this item to put the picture
into correct place automatically. This setting therefore
automatically optimizes the display.
English - 54 -
" o r
28.09.2009 17:59:23 28.09.2009 17:59:23