Viewing The Connections - Side Connectors; Power Connection; Aerial Connection - Schaub Lorenz LT22-356 DB Bedienungsanleitung

Viewing the Connections - Side Connectors

1. CI Slot is used for inserting a CI card. A CI card allows you to view all the channels
that you subscribe to. For more information, see "Conditional Access" section.
2. Video Input is used for connecting video signals of external devices.Connect the
video cable between the VIDEO IN socket on the TV and the VIDEO OUT jack on your
device.
3. Audio Inputs are used for connecting audio signals of external devices. Connect the
audio cable between the AUDIO INPUTS on the TV and the AUDIO OUTPUT jacks on
your device.
Also to enable PC/YPbPr sound connection in such a case, use an appropriate audio
cable between the connected device's audio outputs and the TV's audio inputs
Note: If you connect a device to the TV via the VIDEO or PC/YPbPr cable (YPbPr
cable is not supplied) you should also connect your device with an audio cable to the
AUDIO INPUTS of the TV to enable audio.
4. Headphone jack is used for connecting an external headphone to the system.
Connect to the HEADPHONE jack to listen to the TV from headphones.

Power Connection

IMPORTANT : The TV set is designed to operate on 220-240V AC, 50 Hz.
• After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains.
• Plug the power cable to the mains socket outlet.

Aerial Connection

• Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.
02_MB45_[GB]_1055UK_IDTV_BRONZE11_22855W_10065354_50156390.indd 39 02_MB45_[GB]_1055UK_IDTV_BRONZE11_22855W_10065354_50156390.indd 39
English - 39 -
28.09.2009 17:59:12 28.09.2009 17:59:12