Timers; Conditional Access; Tv Setup; Setup - Schaub Lorenz LT22-356 DB Bedienungsanleitung

Removing a Channel from Favourite List
• Highlight the channel that you want to remove from the
favourite list and press OK button to remove.You can press
"OK" button again to re-add a channel.
• To activate Favourites, go to the Configuration menu and
select Favourite mode. Use " " / " " to set Favourite
mode as on. To cancel Favourites, set Favourite Mode
to Off.
On Screen Help
For all menus, press the INFO button to display the help
information about the menu functions.
Program Guide
This section is same with the instructions given in the
General Operations page. Please see Electronic Programme
Guide (EPG) section in the General Operations part.

Timers

To display timers window, activate the item from the main
menu. To add a timer, press the YELLOW button on the
remote control. Then "Add Timer" window appears.
Channel : " " or " " keys will navigate the user through
the TV or Radio list.
Date : Starting date is entered via the Left/Right or the
numeric buttons.
Start : Starting time is entered via the Left/Right or the
numeric buttons.
End : Ending time is entered via the Left/Right or the
numeric buttons.
Change/Delete : permits or prohibits any modifications
for other users.
Duration: Duration between Start and End time.
Repeat: You can set a timer to be repeated as Once, Daily
or Weekly.
You can save the adjustments by pressing the GREEN key or
cancel the process by pressing the RED button. You can edit
the list via GREEN key and delete with the RED button.
02_MB45_[GB]_1055UK_IDTV_BRONZE11_22855W_10065354_50156390.indd 46 02_MB45_[GB]_1055UK_IDTV_BRONZE11_22855W_10065354_50156390.indd 46

Conditional Access

• Press the " MENU " button to display the main menu and use
the " " or " " button to highlight the "Conditional Access"
line and press the " OK " button:
Some Digital Terrestrial channels operate on a Pay Per
View basis. These require a subscription and a hardware
decoder.
Obtain the Conditional Access Module (CAM) and the viewing
card by subscribing to a pay channel company, then insert those
to the TV using the following procedure.
• Switch off the TV and unplug from the mains.
• The CAM should be correctly inserted, it is impossible to
insert fully if reversed. The CAM or the TV terminal may be
damaged if the CAM is forcefully inserted.
• Connect the TV to the mains supply, switch on and then wait
for few moments until the card is activated.
• Some CAMs may require the following set up. Please set
the CAM by entering the IDTV menu, Conditional Access then
pressing the "OK" button. (CAM set up menu is not displayed
when it is not required.)
• To see the viewing contract information: enter IDTV; press
the " M ENU" button, then highlight Conditional Access and
press the " OK " button.
• When no module is inserted, "No Conditional Access module
detected" message appears on the screen.
• Refer to the module instruction manual for details of the
settings.
Note: Insert or remove the CI module only when the TV is switched
off or in standby mode.

TV Setup

You can use this item to display the TV functions.
The digital TV Setup menu screen is accessed from the main
menu. Press the "MENU" button to display the main menu and
use " " or " " button to highlight "TV Setup", press the " OK "
button to display TV Setup menu screen.
You can find detailed information for all menu items in
"Analogue TV Menu System" section.

Setup

The adjustments in this menu are given as the following:
English - 46 -
28.09.2009 17:59:17 28.09.2009 17:59:17