Analogue Tv Menu System; Picture Menu - Schaub Lorenz LT22-356 DB Bedienungsanleitung

To install factory settings, highlight "First Time Installation"
menu item and press "OK" button, then you will be asked
whether or not to delete the settings. Selecting "Yes" by
pressing "OK" button while the "Yes" is highlighted will
delete the existing channel table.
Then you will be asked to confirm for deleting all channels
and settings:
By selecting Yes and pressing the "OK" button, the existing
channel table will be deleted. After factory settings are
loaded, "First Time Installation" menu will be displayed.
The menu which is displayed for language selection
appears on the screen at first. By using " " or " " buttons,
select the desired language option, and press OK button
to activate.
After then, "First time installation" OSD will appear on the
screen. By pressing " " or " " buttons, select the Country
you want to set and press "OK" button (* only for EU
countries).
Press the "OK" button to start installation. After search is
completed for digital channels, a message asking whether
to search for analogue channels appears on the screen.
This process is same as described in Automatic Search
section. .
02_MB45_[GB]_1055UK_IDTV_BRONZE11_22855W_10065354_50156390.indd 50 02_MB45_[GB]_1055UK_IDTV_BRONZE11_22855W_10065354_50156390.indd 50

Analogue TV Menu System

Picture Menu

Mode
For your viewing requirements, you can set the related
mode option.
Press " " or " " button to select Mode . Press " " or "
" button to choose from one of these options: Cinema ,
Dynamic and Natural .
Brightness/Contrast/Colour/Sharpness/Hue
Press " " or " " button to select the desired option. Press
" " or " " button to set the level.
Note : Hue option can only be visible when the TV receives an
NTSC signal.
Colour Temp
Press " " or " " button to select Colour Temp . Press "
" or " " to choose from one of these options: Cool , Normal
and Warm .
Note :
• Setting Cool option gives white colours a slight blue stress.
• Setting Warm option gives white colours a slight red stress.
• For normal colours, select Normal option.
Noise Reduction
If the broadcast signal is weak and the picture is noisy, use
Noise Reduction setting to reduce the noise amount.
Press " " or " " button to select Noise Reduction. Press
" " or " " to choose from one of these options: Low ,
Medium , High or Off .
Film Mode
Films are recorded at a different number of frames per
second to normal television programmes.
Press " " or " " button to select Film Mode .
Press " " or " " button to set this feature On or Off.
Turn this feature on when you are watching.
films to see the fast motion scenes clearly.
English - 50 -
28.09.2009 17:59:19 28.09.2009 17:59:19