Using Side Av Connectors; Connecting Other Equipment Via Scart; Inserting Batteries Into The Remote Control Handset; Switching The Tv On/Off - Schaub Lorenz LT22-356 DB Bedienungsanleitung

Using Side AV Connectors

You can connect a range of optional equipment to your LCD
TV. Possible connections are shown below. Note that cables
shown in the illustration are not supplied.
• For connecting a camcorder, connect to the VIDEO IN
socket and the AUDIO SOCKETS. For selecting the related
source, see the section "Input selection" in the following
parts.
• To listen the TV sound from headphones, connect to the
HEADPHONE jack of theTV
Connecting Other Equipment via
Scart
Most devices support SCART connection. You can connect a;
DVD recorder, a VCR or a decoder to your LCD TV by using
the SCART socket. Note that cables shown in the illustration
are not supplied. Power off both the TV and the devices
before making any connections.
For more information, refer to your device's own instruction
book.
02_MB45_[GB]_1055UK_IDTV_BRONZE11_22855W_10065354_50156390.indd 41 02_MB45_[GB]_1055UK_IDTV_BRONZE11_22855W_10065354_50156390.indd 41
Inserting Batteries into the
Remote Control Handset
• Remove the battery cover located on the back of the
handset by gently pulling backwards from the indicated
part.
• Insert two AAA/R3 or equivalent type batteries inside.
Place the batteries in the right directions and replace
the battery cover.
Note : Remove the battery from remote control handset when it is
not to be used for a long period. Otherwise it can be damaged due
to any leakage of batteries.

Switching the TV On/Off

To Switch the TV On

• Connect the power cord to the 220-240V AC ,50 Hz. Then
the standby LED lights up.
• To switch on the TV from standby mode either:
• Press the " " button, P/Ch+ / P/Ch- or a numeric button
on the remote control.
• Press the " " button, -P/CH or P/CH+ button on the TV.
The TV will then switch on.
Note : If you switch on your TV via PROGRAMME UP/DOWN buttons
on the remote control or on the TV set, the programme that you were
watching last will be reselected.
By either method the TV will switch on.

To Switch the TV Off

• Press the " " button on the remote control or press the
" " switch on the TV, so the TV will switch to standby
mode.
• To power down the TV completely, unplug the power
cord from the mains socket.
Note: When the TV is switched to standby mode, standby LED can
blink to indicate that features such as Standby Search, Over Air
Download or Timer is active.
English - 41 -
28.09.2009 17:59:14 28.09.2009 17:59:14