Schaub Lorenz LT22-356 DB Bedienungsanleitung Seite 50

In the configuration menu, highlight the Language Settings
item by pressing " " or " " buttons. Press "OK" and
Language Settings submenu will be displayed on the
screen:
Use " " or " " buttons to highlight the menu item that will
be adjusted and then press " " or " " button to set.
Notes:
• System Language determines the on-screen menu
language.
• Audio Language is used for selecting the soundtrack
of a channels.
• Primary settings are the first priority when multiple
choices are available on a broadcast. Secondary
settings are the alternatives when the first options are
not available.
Installation
The Installation menu is mainly intended to help you for
creating a Channel Table in the most efficient way. Select
Installation from the Configuration menu by pressing "
" or " " buttons.
This menu includes the following items:
(*) For Denmark, Sweden, Norway or Finland.
Automatic Channel Scan
Automatic channel scan is started by pressing "OK" button
while Automatic channel scan item is highlighted.
The following message appears on the screen:
Highlight Yes or No by using " " or " " buttons and press
"OK" button to confirm.
If Yes is selected, automatic search starts.
Selecting No cancels automatic search.
After search is completed for digital channels, a message
asking whether to search for analogue channels appears
on the screen:
Press the "OK" button to search for analogue channels.
The following menu appears on the screen for analogue
channel search:
02_MB45_[GB]_1055UK_IDTV_BRONZE11_22855W_10065354_50156390.indd 49 02_MB45_[GB]_1055UK_IDTV_BRONZE11_22855W_10065354_50156390.indd 49
Select your Country , Language and Text language by
using " " or " " and " " or " " buttons. Press "OK" or
RED button to continue. To cancel, press BLUE button. The
following menu will be displayed during the automatic
tuning:
After APS is finalized, the programme table will appear
on the screen. In the programme table you will see
the programme numbers and names assigned to the
programmes.
Manual Channel Scan
In manual channel scan, the number of the multiplex is entered
manually and only that multiplex is searched for the channels.
For each valid channel number, signal level and signal quality
are shown on the screen.
In both manual and auto search any existing channel in the
database is not re-stored to avoid redundant duplicates
of that channel.
Clear Service List (*)
(*) This setting is visible only when the Country option is
set to Denmark, Sweden, Norway or Finland.
Use this setting to clear channels stored. Press " " or " " button
to select Clear Service List and then press OK. The following OSD
message will be displayed on the screen:
Press OK to cancel. Select Yes by pressing " " or " " button
and press OK to delete all of the channels.
First Time Installation
The user can use this item to load default settings, which
were loaded to the receiver at the factory.
English - 49 -
28.09.2009 17:59:19 28.09.2009 17:59:19