Digital Teletext (** For Uk Only); Analogue Teletext; Widescreen; Idtv Menu System - Schaub Lorenz LT22-356 DB Bedienungsanleitung

Digital Teletext (** for UK only)

• Press the " " button.
• The digital teletext information appears.
• Operate it with the coloured buttons, cursor buttons and
OK button.
The operation method may differ depending on the contents
of the digital teletext.
Follow the instructions displayed on digital teletext screen.
• When Press "SELECT" button or similar message appears
on the screen, press the OK button.
• When the " " button is pressed, the TV returns to
television broadcasting.
• With digital terrestrial broadcasting (DVB-T), in addition
to digital teletext broadcasting together with the normal
broadcasting, there are also channels with just digital
teletext broadcasting.
• The aspect ratio (picture shape) when watching a
channel with just digital teletext broadcasting is the same
as the aspect ratio of the picture viewed previously.
• When you press the " " button again, the digital teletext
screen will be displayed.

Analogue Teletext

Use of teletext and its functions are identical to the
analogue text system. Please do refer to the "TELETEXT"
explanations.

Widescreen

Depending on the type of the broadcast being transmitted,
programmes can be viewed in a number of formats. Press
the "WIDE" button repeatedly to change screen format.
When Auto is selected, the format being displayed is
determined by the picture being broadcasted.
PLEASE NOTE : Menu size changes depending on the chosen
image size.
Notice !
AC3 audio type is not supported. In this case, Tv sound
will be muted. If the broadcast includes AC3 stream, the
following warning message will be displayed on the
screen:
If there is no audio available, the following warning message
will be displayed on the screen:.
02_MB45_[GB]_1055UK_IDTV_BRONZE11_22855W_10065354_50156390.indd 44 02_MB45_[GB]_1055UK_IDTV_BRONZE11_22855W_10065354_50156390.indd 44

IDTV Menu System

Press the " MENU " button. Main menu will be displayed.

Channel List

Using the " " or " " button on the remote control, make sure
that the first item, Channel List, is highlighted and press the
"OK" button to display the Channel List.
Navigating the Entire Channel List
Press " " or " " button for selecting the previous or next
channel. You can press "RED" or "GREEN" button to move
page up or page down.
To watch a specific channel, highlight it using " " or " " button
and then press " OK " button, while the "Select" item on Channel
List menu is highlighted by using " " or " " button.
Then the name and number of the selected channel will be
displayed in the top-left and top-right of the channel display
at the top-right of the screen, respectively.
Moving the channels in the channel list
• Press " " or " " buttons to select the channel that will
be moved.
• Press " " or " " buttons to select the " Move " item on
Channel List menu.
Following OSD will be displayed next to " OK " item to indicate
that enter a number by using the numeric buttons on the
remote control and press " OK " to confirm.
English - 44 -
28.09.2009 17:59:16 28.09.2009 17:59:16