Program Guide; Timers; Common Interface; Tv Setup - Schaub Lorenz 22LT475CD Bedienungsanleitung

Favourite List. F icon indicates that a channel is added
to Favourite List.
Removing a Channel from a Favourite List
• Highlight the channel that you want to remove from
the favourite list and press OK button to remove.
You can press OK button again to re-adding a
channel.
• To activate Favourites, go to the Con guration menu
and select Favourite mode. Use " " or " " to set
Favourite mode as on. To cancel Favourites, set
Favourite Mode to Off.
INFO
Hint: Pressing button can help you for
displaying information in IDTV.

Program Guide

This section is same with the instructions given in
the General Operations page. Please see Electronic
Programme Guide (EPG) section in the General
Operations part.

Timers

To display timers window, press either TIME button
on the remote control or activate the item from the
main menu. To add a timer, press the YELLOW
button on the remote control. Then "Add Timer"
window appears.
Channel: " " or " " keys will navigate the user
through the TV or Radio list.
Date: Starting date is entered via the Left/Right or
the numeric buttons.
Start: Starting time is entered via the Left/Right or
the numeric buttons.
End: Ending time is entered via the Left/Right or the
numeric buttons.
Duration: Displays the duration of the recording.
Duration item will be automatically displayed after the
starting and ending times are entered.
Change / Delete: permits or prohibits any modi cations
for other users.
You can save the adjustments by pressing the GREEN
key or cancel the process by pressing the RED button.
You can edit the list via GREEN key and delete with
the RED button.

Common Interface

Press MENU button to display the main menu and
use the " " or " " buttons to highlight the "Common
Interface" line and press OK button.
It is required to subscribe to a pay channel company
to view the pay channels of the digital terrestrial or
cable broadcasting.
Obtain the Conditional Access Module (CAM) and
the viewing card by subscribing to a pay channel
company, then insert those to the Television using
the following procedure.
• Switch off the TV and unplug from the mains.
• Insert the CAM, and then the viewing card to the
slot.
• The CAM should be correctly inserted, it is impossible
to insert fully if reversed. The CAM or the TV terminal
may be damaged if the CAM is forcefully inserted.
• Connect the TV to the mains supply, switch on
and then wait for few moments until the card is
activated.
• Some CAMs may require the following set up.
Please set the CAM by entering the digital/cable
TV menu, Common Interface then pressing OK
button. (CAM set up menu is not displayed when it
is not required.)
•To see the viewing contract information:
• DTV mode; press MENU button, then highlight
Common Interface and press OK button.
• When no module is inserted, "No Common
Interface module detected" message appears on
the screen.
• Refer to the module instruction manual for details
of the settings.
NOTE: Insert or remove the CI module only when the
TV is in STANDBY mode or SWITCHED OFF.

TV Setup

You can use this item to display the TV functions.
The digital TV Setup menu screen is accessed from
the main menu. Press the MENU button to display
the main menu and use or buttons to highlight "TV
Setup". Press OK button to display TV Setup menu
screen.
You can  nd detailed information for all menu items
in "Analogue TV Menu System" section.

Setup

The adjustments in this menu are given as the
following:
English - 65 -