Werbung
Verfügbare Sprachen
Verfügbare Sprachen
a component audio cable as illustrated below. When
the connection is made, switch to YPbPr source.
See, "Input selection" section.
• You may also connect through the SCART 1 or
SCART 2. Use a SCART cable as shown below.
Note: These three methods of connection perform the
same function but in different levels of quality. It is not
necessary to connect by all three methods.
Using Side AV Connectors
You can connect a range of optional equipment
to your LCD TV. Possible connections are shown
below. Note that cables shown in the illustration are
not supplied.
• For connecting a camcorder, connect to the VIDEO
IN socket and the AUDIO SOCKETS. Do not connect
the camcoder to VIDEO IN socket at the same time
since it can cause noise in the picture. For selecting
the related source, see the section "Input selection"
in the following parts.
• To listen to the TV sound from headphones, connect
to the HEADPHONE jack of theTV.
Connecting Other Equipment
via Scart
Most devices support SCART connection. You can
connect a; DVD recorder, a VCR or a decoder to your
LCD TV by using the SCART sockets. Note that cables
shown in the illustration are not supplied.
Power off both the TV and the devices before making
any connections.
For more information, refer to your device's own
instruction book.
Input Selection
Once you have connected external systems to your
TV, you can switch to different input sources.
• Press "SOURCE" button on your remote control for
directly changing sources.
or,
• Select "Source" option from the main menu
by using " " or " " button. Use then " " or
" " button to highlight an input and press " " button
to select.
Note: You can mark desired source options by
pressing the OK button. Therefore, when
button is pressed, only the marked source options will
be available (except for the TV source).
English - 57 -
"
"
SOURCE
Werbung
Kapitel
