Viewing The Connections - Side Connectors - Schaub Lorenz 26LT481CT Bedienungsanleitung

6. S/PDIF Digital Out outputs digital audio signals of the currently watched source.
Use a digital optic cable to transfer audio signals to a device that has S/PDIF input.
7. RF Input/SAT. input connects to an aerial,cable and satellite antenna system.
Note that if you use a decoder or a media recorder, you should connect the aerial cable through the
device to the television with an appropriate antenna cable, as shown in the illustration in the following
pages.
8. HDMI 3: HDMI Input
9. HDMI 2: HDMI Input
10. HDMI 1: HDMI Input
HDMI Inputs are for connecting a device that has an HDMI socket. Your LCD TV is capable of
displaying High De nition pictures from devices such as a High De nition Satellite Receiver or DVD
Player. These devices must be connected via the HDMI sockets or Component Socket. These sockets
can accept either 720p or 1080p (optional) signals. No sound connection is needed for an HDMI to
HDMI connection.
11. PC Input is for connecting a personal computer to the TV set.
Connect the PC cable between the PC INPUT on the TV and the PC output on your PC
12. Ethernet input (for service and Internet connectivity)

Viewing the Connections - Side Connectors

1. CI Slot is used for inserting a CI card. A CI card allows you to view
all the channels that you subscribe to. For more information, see
"Conditional Access" section.
2. Side USBs
3. Side HDMI Input is for connecting a device that has an HDMI socket.
4. Headphone jack is used for connecting an external headphone to the
system. Connect to the HEADPHONE jack to listen to the TV from
headphones (optional).
5. Video Input is used for connecting video signals of external devices.
Connect the video cable between the VIDEO IN socket on the TV and
the VIDEO OUT jack on your device.
6. Audio Inputs are used for connecting audio signals of external devices.
Connect the audio cable between the AUDIO INPUTS on the TV and the
AUDIO OUTPUT jacks on your device.
Note: If you connect a device to the TV via the VIDEO INPUT, you should
also connect your device with an audio cable to the AUDIO INPUTS of the
TV to enable audio.
English - 59 -