Yard Force SA900 Originalanleitung Seite 42

PROGRAMMING
5.5.3 Set Signal of boundary
This Robot has two boundary wire signals, Signal 1 and Signal 2. When you and your
neighbor purchase the same robot, it is highly recommended that you set them on different
signals to prevent disturb to each other.
Firstly when you connect the boundary wire to the charging station, make sure you are
aware of which signal (S1 or S2) is generated from the charging station.
S1 or S2
S2
S1
Press S1 or S2 on the touch screen, make sure it same with charging station wire connec-
tion.
39