Installation Guide - Yard Force SA900 Originalanleitung

INSTALLATION GUIDE

4. Installation Guide
This chapter explains how to install the YARD FORCE Robotic Lawnmower, please read
this completely before you start the installation.
4.1. Introduction
It is recommended that you make a draft of your lawn, including all obstacles and how
these should be protected. It makes it easier to find a good position for charging station
and how to correctly place the boundary wire around your garden perimeter protecting
bushes, flower beds etc. You will also need some tools, like a hammer and wire cutters
pliers or scissors.
4.2. Cutting Limitations
For rigid and fixed Obstacles higher than 100mm, such as walls, fences garden furniture
etc. the crash sensors reacts immediately YARD FORCE Robotic Lawnmower will
STOP, reverse backwards and then turn around to cut in another direction but it is still
recommendable to protect the obstacle by creating a boundary around these.
< 400 mm
> 100 mm
18