Operating Procedures; Power Connection - Julabo TW2 Betriebsanleitung

7.

Operating procedures

7.1.

Power connection

Caution:

ConnOnly connect the unit to a power socket with earthing contact
(PE – protective earth)!

The power supply plug serves as safe disconnecting device from the line
and must be always easily accessible.

Never operate equipment with damaged mains power cables.

Regularly check the mains power cable for material defects.

We disclaim all liability for damage caused by incorrect line voltages!
Cooling installation / continuo water supply
Recommendation:
For continuous water supply and counter-cooling
Order No. Description
8 970 415 Liquid level/cooling set
8 970 416 Cooling coil
Water bath protective media
We recommend the use of the "Aqua-Stabil" protective media to
eliminate the formation of algae, bacteria, and other micro-organisms.
Order No. Description
8 940 006 6 bottles 100 ml each
8 940 012 12 bottles 100 ml each
Check to make sure that the line voltage matches the supply
voltage specified on the identification plate.
Deviations of ±10 % are permissible.
for model TW8, TW12, TW20
Water Baths
41