Do not damage or modify the device or power adapter. Also, do not place heavy
objects on the power cord, or pull on or excessively bend it, as this could cause
electrical damage and result in a fire or electrical shock.
Always grasp the plug portion when unplugging the power plug. Pulling on the
cord may expose or snap the core wire, or otherwise damage the cord. If the
cord is damaged, this could cause an electricity leak and result in a fire or
electrical shock.
CAUTION!
Do not use accessories other than the provided (e.g. wall power supply).
Do not place any heavy objects on any cables (e.g. power cords, sensor cables,
actuator cables, optical cables).
Look for adequate ventilation; don't place the units near a radiator, oven or other
heat sources. Do not put anything on top oft the units except those that are
designed for that purposes (e.g. actuators).
Plug the wall power supply completely in the power socket so that it can not
loosening inadvertently.
Leave sufficient space around the power supply so that it can be unplugged
easily. If objects are placed around the power supply, you will be unable to
unplug it in an emergency.
Install the system in that way that the dc power plug is accessible without
problems.
6.2. operation
RISK OF ELECTRIC SHOCK!
Do not open the units! There are no user serviceable parts inside and opening or
removing covers may expose you to dangerous shock hazards or other risks.
Refer all servicing to qualified service personnel.
Do not spill inflammable substances inside the voltage amplifier. If these items
come into contact with an electrical component inside the voltage amplifier, this
may result in a fire or electrical shock.
CAUTION!
If the voltage amplifier emits smoke, big heat or unusual smells, immediately
break the supply of current and unplug the wall power supply from the outlet.
Then contact our technical service.
Geschäftsführer: Dr. Bernt Götz, • Telefon 03641/66880 • Fax 03641/668866 • www.piezosystem.com
6