Safety Instructions - piezosystemjena nano box Bedienungsanleitung


Piezo-actuators can generate voltages by warming or cooling only (caused by
the longitudinal change). The discharge potential should not be ignored due to
the inner capacitance. This effect is insignificant at usual room temperature.

Piezo-actuators from piezosystem jena are adjusted and glued. Any opening of
the unit will cause misalignment or possible malfunction and the guarantee will
be lost.

Please contact piezosystem jena or your local representative, if there are any
problems with your actuator or power supply. The responsible representatives for
the countries you can find at our website: http://www.piezojena.com at the rubric
Representatives.
Caution!
Shock forces may damage the built-in ceramic element. Please avoid such
forces, and handle the units with care, otherwise the guarantee will be lost.

6. safety instructions

Icons

RISK OF ELECTRIC SHOCK! Indicates that a risk of elctric shock is present
and the associated warning should be observed.
CAUTION! REFER TO OPERATOR´S MANUAL – Refer to your operator`s
manual for additional information, such as important operating and
maintenance instructions.
RISK OF ELECTRIC SHOCK!

Do not open the units! There are no user serviceable parts inside and opening or
removing covers may expose you to dangerous shock hazards or other risks.
Refer all servicing to qualified service personnel.

Do not spill any liquids into the cabinet or use the units near water. This could
cause a electric shock, fire or malfunction of the unit.

Do not touch the PIEZO OUT-plug socket on the front panel. It could be under
dangerous voltage.

Do not insert objects of any kind into the cabinet slots, as they may touch
dangerous voltage points, which can be harmful or fatal or may cause electric
shock, fire or equipment failure.
Geschäftsführer: Dr. Bernt Götz, • Telefon 03641/66880 • Fax 03641/668866 • www.piezosystem.com
4