Appliance Diagram - CASO DESIGN VC300 Pro Original Bedienungsanleitung

16.1 Appliance diagram

1 Connector for vacuum hose
3 Cover-lock - To lock the cover, press on the right and left side
4 Cover-unlock - Press buttons on right and left side
5 Cutter unlock - Press buttons on right and left side
Lift up the top cover. Underneath you'll find:
• Sealing Strip: Gold strip inside the top cover heats up to seal bags.
• Cutter: After pressing the Cover Unlock buttons, the Cutter will swing down into place for
cutting. Push it back into place until a click is heard to re-lock.
• Removable vacuum chamber. The open end of the bag must be placed inside the
chamber. This feature makes sure that air cannot escape from the bag and that excess
liquid is removed. Easy to remove and clean.
The sealing bar gets very hot.
Please observe the following safety notice in order not to burn yourself or others.
► To avoid getting burned, never touch the sealing bar directly after sealing process.
Do not remove the Teflon tape (T).
Warning
Please note
2 Panel
39