Preheating And Convection Cooking" Mode - CASO DESIGN MCG25 Ceramic chef Original Bedienungsanleitung


Select the temperature you require by pressing the Preheat/Convection
button until you reach the level you require (see following table).
 Setting the cooking time
Set the cooking time by turning the Time/Menu control dial.

After selecting the program, press the button Start /Quick start, to start the
preset cooking programme.
 End of the cooking programme
Once the end of the cooking time is reached, four signal tones will be emitted and END will
appear in the display.
► You can check the hot air temperature during cooking by pressing the button
Preheat/Convection.
Button presses
1
2
3
4
5
14.12.4

"Preheating and Convection cooking" mode

The device can be programmed for combination preheating and convection cooking.

Select the temperature you require by pressing the Pre-heat/Convection
button until you reach the level you require.

After selecting the temperature, press the button Start /Quick start. A signal
ton is emitted and the PREH display blinks until the oven has reached the
programmed temperature.
 Food setting
Set the food you wish to cook in the device.
 Setting the cooking time
Set the cooking time by turning the Time/Menu control dial.
Setting the cooking time
Starting the cooking programme
Please note
Temperature Button presses
200 °C
190 °C
180 °C
170 °C
160 °C
Setting the temperature
To start heating the oven
Temperature
6 150 °C
7 140 °C
8 130 °C
9 120 °C
10 110 °C
74