Proper Use - lutz B2 Vario PP 32-DL Originalbetriebsanleitung

en
• Clarify responsibilities, competencies and moni-
toring of the personnel.
• Ensure that all work is carried out by technical
qualified personnel only:
- Assembly, servicing, maintenance work
- Work on the electrics
• Instruct inexperienced personnel in the use of
the pump before allowing them to operate it for
the first time.
Safety devices
• Provide the following safety devices and ensu-
re their function:
- with possible electrostatic charge: Provide the
corresponding earthing.
Statutory warranty
• During the guarantee period, obtain the
manufacturer's permission for modifications,
maintenance work or alterations.
• Use only original components or components
authorized by the manufacturer.
Duties of the personnel
• Observe the notices on the pump and maintain
them in a legible state, e.g.rotation arrow,
marking for fluid connections.
• Use protective equipment where necessary.
• Do not reach into the intake port of the pump.
• Only perform work on the pump during
downtime.
• After completing all the work on the pump,
remount the safety devices in accordance with
specifications.
16

2.2 Proper use

The drum pump Lutz B2 Vario is a sealless, vertical
centrifugal pump with axially acting rotor. The
pump is only used to transfer pure, turbid, water-
like, aggressive and non aggressive liquids.
• The apparatus is provided for commercial use
only.
• Pump is not allowed to be operated in explo-
sion hazard areas.
• Do not use for pumping flammable liquids.
• Pump may only be installed in an upright
position.
• Pump is a hand-held appliance and must not
be left unattended.
• The pump is intended for indoor use only.
• Pump may only be used to pump the agreed
liquids (→ contract data sheet, → technical
data table 7).
• Observe the technical data of the motor
(→ table 8).
• Dry running must be avoided.
- Ensure that the pump is commissioned only
with liquid and is never operated without
pump medium.
If the product and supplied accessories are used for
other purposes than the intended purpose, it is the
responsibility of the user to check the suitability and
admissibility. Product use not confirmed in writing
by the manufacturer absolves the manufacturer of
any liability.
The manufacturer is not liable for consequences of
incorrect treatment, use, maintenance, servicing
and operation of the appliance, as well as normal
wear and tear. The same applies if faults arise from
intervention or configurations on the part of the
user not confirmed by the manufacturer.