Ordering Replacement Parts - Pattfield Ergo Tools PE-EAS 7520 Handbuch

Danger!
•
Always disconnect the mains plug before cleaning the chainsaw.
•
Never immerse the unit in water or other liquids in order to clean it.
10.2 Storage
•
If you are not going to use the chainsaw for an extended period of
time, remove the chain oil from the tank. Briefly immerse the saw
chain and the cutter bar into an oil bath and then wrap them in oil
paper.
•
Store the equipment and its accessories out of children's reach in
a dark and dry place at above freezing temperature. The ideal sto-
rage temperature is between 5 und 30 °C.

10.3 Ordering replacement parts:

Please quote the following data when ordering replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
Current prices and information are available on request at your Horn-
GB
bach store.
11. Disposal and recycling
The equipment is supplied in packaging to prevent it from being da-
maged in transit. The raw materials in this packaging can be reused
or recycled. The equipment and its accessories are made of various
types of material, such as metal and plastic. Never place defective
equipment in your household refuse. The equipment should be taken
to a suitable collection center for proper disposal. If you do not know
the whereabouts of such a collection point, you should ask in your
local council offi ces.
Anl_PE_EAS_7520_SPK7.indb 316 Anl_PE_EAS_7520_SPK7.indb 316
- 316 -
29.07.16 09:40 29.07.16 09:40