Pattfield Ergo Tools PE-EAS 7520 Handbuch Seite 295

this electric tool is aff ected. Have damaged parts repaired
before using the appliance. Many accidents are caused by
badly maintained electric tools.
f) Keep your cutting tools sharp and clean. Carefully maintained
cutting tools with sharp cutting edges will jam less and are easier
to control.
g) Make sure to use electric tools, accessories, attachments,
etc. in accordance with these instructions. Take the condi-
tions in your work area and the job in hand into account.
Using electric tools for any purpose other than the one for which
they are intended can lead to dangerous situations.
5. Service
a) Have your electric tool repaired only by trained personnel
using only genuine spare parts. This will ensure that your elec-
tric tool remains safe to use.
Special safety instructions for chainsaws
•
Always disconnect the mains plug before performing any
maintenance work, when the chainsaw is not in use and be-
fore changing any tools.
•
When the chainsaw is running make sure that you keep all
parts of your body away from the chainsaw. Before starting
up the chainsaw make sure that it is not touching anything.
When you are working with a chainsaw, a single moment of carel-
essness is all it takes to catch up clothing or parts of your body in
the chainsaw.
•
Do not use the chainsaw while up a tree unless you are spe-
cially trained to do this. Otherwise you risk injuring yourself if
you use the chainsaw inappropriately whilst up a tree.
•
When cutting through a branch which is under tension, take
into account how it will spring back once the cut has been
made. Once the tension in the wood fibers is released the cut
branch could hit the operator and/or seize control of the chainsaw.
Anl_PE_EAS_7520_SPK7.indb 295 Anl_PE_EAS_7520_SPK7.indb 295
- 295 -
GB
29.07.16 09:40 29.07.16 09:40