Pattfield Ergo Tools PE-EAS 7520 Handbuch Seite 294

d) Remove keys and wrenches before switching on the electric
tool. A tool or key which comes into contact with rotating parts of
the appliance can lead to injuries.
e) Avoid abnormal working postures. Make sure you stand
squarely and keep your balance at all times. In this way, you
can control the electric tool better in unexpected circumstances.
f) Wear suitable work clothes. Do not wear loose clothing or
jewellery. Keep hair, clothes and gloves away from moving
parts. Loose clothing, jewellery or long hair can get trapped in
moving parts.
g) If vacuuming devices and draining devices can be fi tted,
make sure that these are correctly attached and correctly
used. The use of a dust extraction system can reduce the danger
posed by dust.
4. Usage and treatment of the electric tool
a) Do not overload the appliance. Use the correct tool for your
work. You will be able to work better and more safely within the
given performance boundaries.
b) Do not use an electric tool with a defective switch. An electric
GB
tool that cannot be switched on or off is dangerous and must be
repaired.
c) Pull the plug out of the socket and/or remove the battery
before making any adjustments to the appliance, changing
accessories or put the appliance down. This safety measure
prevents starting the electric tool unintentionally.
d) Keep unused electric tools out of the reach of children. Do
not allow people who are not familiar with the appliance or
who have not read these instructions to use the appliance.
Electric tools are dangerous if they are used by inexperienced
people.
e) Clean your electric tool carefully. Check whether moving
parts are functioning properly and not jamming, whether
parts are broken or damaged enough that the functioning of
Anl_PE_EAS_7520_SPK7.indb 294 Anl_PE_EAS_7520_SPK7.indb 294
- 294 -
29.07.16 09:40 29.07.16 09:40