Safety Information; Basic Safety Instructions; Conventions In This Document; Meaning Of The Warning Notes - Dräger X-act 7000 Technisches Handbuch

|
en

Safety information

1 Safety information
1.1

Basic safety instructions

– Before using this product, carefully read these instructions for use and those of
– Only trained and competent personnel are permitted to inspect, repair and
– Strictly follow the instructions for use. The user must fully understand and strictly
– Do not dispose of the instructions for use. Ensure that they are stored and used
– Only trained and competent users are permitted to use this product.
– Comply with all local and national rules and regulations associated with this
– Use only genuine Dräger spare parts and accessories. Otherwise, the proper
– Do not use a faulty or incomplete product. Do not modify the product.
– Notify Dräger in the event of any component fault or failure.
Use in areas subject to explosion hazards
Devices or components for use in explosion-hazard areas which have been tested
and approved according to national, European or international explosion protection
regulations may only be used under the conditions specified in the approval and
with consideration of the relevant legal regulations. The devices or components
may not be modified in any manner. The use of faulty or incomplete parts is
forbidden. The appropriate regulations must be observed at all times when carrying
out repairs on these devices or components.
2

Conventions in this document

2.1

Meaning of the warning notes

The following warning notes are used in this document to notify users of possible
dangers. The meanings of the warning notes are defined as follows:
Alert icon
38
the associated products.
service the product as detailed in the instructions for use and the technical
manual. Further maintenance work that is not detailed in these instructions for
use or the technical manual must only be carried out by Dräger or personnel
qualified by Dräger. Dräger recommend a Dräger service contract for all
maintenance activities.
observe the instructions. Use the product only for the purposes specified in the
intended use section of this document.
appropriately by the user.
product (e.g. IEC 60079-14).
functioning of the product may be impaired.
Signal word
WARNING
CAUTION
Consequences in case of nonob-
servance
Indicates a potentially hazardous situation
which, if not avoided, could result in death
or serious injury.
Indicates a potentially hazardous situation
which, if not avoided, could result in injury.
It may also be used to alert against unsafe
practices.
Technical Manual
|
®
X-act 7000