GUTMANN ABIERTA Montageanleitung Seite 20

EN
Schematic exhaust air routing
Operation only possible with supply air
damper or possible with the window open.
The ABIERTA cooker hood is only suitable for
electric hobs.
Applications in connection with fireplaces for
solid fuels and gases are not permitted !
Minimum distance from an electric cooking appliance
The optimum extraction performance is achieved if the
hood is mounted at a height of at least 400mm from the
top edge of the worktop. To prevent the formation of con-
densation, a backwater flap must be mounted directly on
the outside of the air outlet.
Connection to power supply
Check that the rated voltage of the device corresponds to the local mains voltage. In-
correct setting will damage or destroy the device.
Before operation, check whether all cables and wires are faultless and undamaged. In
particular, make sure that the cables have no kinks, have not been laid too short
around corners and that there are no objects on the cables. Furthermore, make sure
that all plug connections are tight. Faulty shielding or wiring endangers your health
(electric shock) and can destroy other equipment. Devices with a mains plug are equip-
ped with a safety-tested mains cable from the country of use and must only be connec-
ted to a properly earthed earth contact socket, otherwise there is a risk of electric
shock. Make sure that the socket at the device or the earth contact socket of the house
installation is freely accessible so that the mains cable can be disconnected from the
socket in an emergency or during service or maintenance work.
Before the cooker hood is shipped, it is subjected to a detailed test by our quality con-
trol department, during which all functions are tested.
The pictures and drawings used in the operating and assembly instructions may differ
from the model supplied or may contain options which are not included in the scope of
delivery.
Transport, unpacking, installation
Condensation may occur if the appliance is brought into the installation site from a
cold environment. Please wait until the appliance has adjusted to the temperature and
is completely dry before operating it. The acclimatization period depends on the tempe-
rature difference and the type and design of the appliance. However, it should be at
least 12 hours.
Please wear protective gloves during installation to avoid the risk of injury. Prepare the
necessary tools before mounting the hood.
For the installation of the hood, on-site requirements must be met to ensure smooth
installation of the hood and kitchen appliances must be covered.
Prepare a suitable exhaust air duct in the ceiling, open the false ceiling, create ope-
nings, etc...
Before drilling in the wall, make sure that no pipes behind it are damaged.
20