Renishaw RMP60 Schnellstartanleitung Seite 19

Key to the symbols
LED short flash
LED long flash
Deflect the stylus for less than 4 seconds
to move to the next menu option.
Deflect the stylus for more than
4 seconds to move to the next menu.
To exit, leave the stylus untouched for
more than 20 seconds.
!
CAUTION: Do not remove the batteries
whilst in configuration mode. To exit, leave the stylus
untouched for more than 20 seconds.
Placing the probe in configuration mode
1
2
> 5 s
3
LED check
Deflect the stylus and hold it
deflected until after the battery
status has been displayed at the
end of the review sequence.
Battery status
Battery good
To change the switch-on method,
go to the next page.
3
Battery low
or
1-13