Emerson Klauke ASSG-L Bedienungsanleitung Seite 20

Instruction Manual
ASSGxxx-L
Brief inspection before putting into
service
Please check whether you received all parts mentioned
in the basic supply
Basic supply:
1 battery operated electric hydraulic pump ASSG-L
10m High pressure hose with coupling to connect to the
pump ASSG-L
1 Cutting head SSK65, SSK105, SSKG85,
SSKG105 or SSK120S
1 Battery charger LGL1 (DC18RC)
2 Li-Ion battery 5 Ah RAL4 (BL1850)
1 Instruction manual with Test certifi cate
1 case
1 Earthing cable 25 mm² with ~ rod to connect to the
cutting head according to DIN EN 50340
Accessory:
1 Earthing rod with cable 25 mm²
Please check your bill of delivery whether you received all
requested parts.
Symbols
Safety warnings
Please do not disregard these instructions in or-
der to avoid human injuries and environmental
damages.
Operational warnings
Please do not disregard them to avoid dama-
ging the tool.
Index
1. Introduction
2. Warranty
3. Description of the hydraulic cutting unit
3.1. Description of components
3.2. Description of the light diode display
3.3. Description of the operation and control func-
tions
3.4. Description of the connecting devices
3.5. Description of the cutting procedure
4. Remarks in respect to the determined use
4.1. Operation of the units
4.2. Explanation of the application range
4.3. Remarks in respect of alternative means to
determine live lines
4.4. Service and Maintenance instructions
4.5. Oil changing cycles
4.6. Reference, as to which (spare-) parts can be
exchanged by the customer.
4.7. Storage and transport of the cutting unit
5. Troubleshooting
6. How to act after a short circuit
7. Technical data
8. Putting out of service/waste disposal
1. Introduction
Before starting to use the tool please read
the instruction manual carefully.
Use this tool exclusively for its determined use.
Cutting of conductors/cables with the help of this tool
must only be performed by specially trained personnel.
The minimum age is 16 years.
HE.14606_B © 02/2016
This instruction manual has to be carried along during the
entire life span of that tool.
The operator has
• to guarantee the availability of the instruction manual
for the user and
• to make sure, that the user has read and understood
the instruction manual.
Prior using the safety cutting unit for the fi rst time and af-
terwards at least once annually the user of this unit must
be instructed by a safety engineer about the special risks
involved while working with this unit and the necessary
precaution measurements.
2. Warranty
If the tool is operated according to its intended
use and the regular maintenance services are
observed our warranty is 24 months from the
time of delivery. Worn-out parts resulting from
its intended use are excluded. We reserve the
right to rework the tool in case of a justifi ed war-
ranty claim.
3. Description of the hydraulic safety
cutting unit
3.1 Description of the components
The hydraulic safety cutting unit type ASSG-L consists of
the following components:
see pages I - V.
3.2 Brief description of the important fea-
tures of the unit
A manual retraction allows the user to return the pis-
ton/cutting blades into the starting position in case
of an incorrect crimp.
A manual retraction stop allows the user to stop the
retract at any position during the automatic retrac-
tion.
The unit is equipped with a special brake which
stops the forward motion of the blades when the
trigger is released.
The unit is equipped with a double piston pump
which is characterised by a rapid approach of the
dies towards the conductor/cable and a slower cut-
ting motion.
The tool is equipped with a microprocessor which
shuts off the motor automatically after the cut is
completed, indicates service intervals and low bat-
tery charges and performs internal checks.
All tool functions can be controlled by one trigger.
This results in an easy handling and a better grip
compared to a two button operation.
Power saving function through motor switch-off.
Li-Ion batteries do neither have a memory effect nor
self discharge. Even after long periods of non ope-
ration the tool is always ready to operate.
The oil used in our tool is particularly environmen-
tally friendly and and has been rewarded
Angel". The oil is also suitable for low temperatures
and has excellent lubrication characteristics
„The Blue
1
GB