Gwarancja I Serwis - VERTO 51G707 Betriebsanleitung

GWARANCJA I SERWIS

Warunki gwarancji oraz opis postepowania w przypadku reklamacji
zawarte są w załączonej Karcie Gwarancyjnej.
Serwis Centralny
GTX Service
Ul. Pograniczna 2/4
02-285 Warszawa
Sieć Punktów Serwisowych
i pogwarancyjnych dostępna na platformie internetowej gtxservice.pl
Grupa Topex zapewnia dostępność części zamiennych oraz
materiałów eksploatacyjnych dla urządzeń i elektronarzędzi.
Pełna oferta części i usług na gtxservice.pl. Zeskanuj kod QR i wejdź:
tel. +48 22 573 03 85
fax. +48 22 573 03 83
e-mail service@gtxservice.pl
do napraw gwarancyjnych
GB
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
BELT SANDER
51G707
CAUTION: BEFORE USING THE POWER TOOL READ THIS MANUAL
CAREFULLY AND KEEP IT FOR FUTURE REFERENCE.
DETAILED SAFETY REGULATIONS
• Use the belt sander for sanding only.
• Do not use the belt sander when it is held in fixed position, by
moving processed material.
• Inhalation of dust, such as lead based, metal or of certain wood
species (e.g. oak), is dangerous to your health. Therefore it is
necessary to always work with device for dust extraction.
• Do not use the sander for materials that contain asbestos.
• Wear protective half mask and anti-splinter goggles when sanding.
• Use of earmuffs is recommended.
• Fix processed material to prevent it from slipping. You can fix the
material e.g. using a vice.
• Use sanding belts of recommended size only.
• Before starting to replace sanding belt, disconnect the sander from
power supply by removing power cord plug from mains socket.
• During operation, move the sander when holding it firmly with both
hands.
• Always follow instructions contained in general and detailed safety
regulations for using hand-held power tools.
CAUTION! This device is designed to operate indoors.
The design is assumed to be safe, protection measures and
additional safety systems are used, nevertheless there is always
a small risk of operational injuries.
CONSTRUCTION AND USE
Belt sander is a power tool driven by a single-phase commutator
motor. The sander does not require earth lead (insulation class II).
Belt sander is designed for surface sanding of wood products,
polishing wood surfaces with lacquer coating, fine polishing of
lacquered metal surfaces, removal of rust or specks of lacquer before
applying new lacquer, finishing of concrete surfaces etc. Range of use
covers repair and building works, woodworking and any work from
the scope of individual, amateur activities (tinkering).
Use the power tool according to the manufacturer's instructions only.
DESCRIPTION OF DRAWING PAGES
Below enumeration refers to the device elements depicted on the
drawing pages of this manual.
1. Additional grip
2. Carbon brush cover
3. Dust extraction outlet
4. Driving belt cover
5. Wheel for sanding belt adjustment
6. Sanding belt
7. Main handle
8. Switch
9. Switch lock button
10. Guiding roller
11. Sanding belt tension lever
* Differences may appear between the product and drawing.
MEANING OF SYMBOLS
CAUTION
WARNING
ASSEMBLY/SETTINGS
9