Mechanical Protection; Maintenance; Cleaning; Metrological Verification - Chauvin Arnoux C1 Serie Bedienungsanleitung

4.6.2 EC-compliant electromagnetic compatibility
n Emissivity (as per EN 50081-1)
n Susceptibility (as per EN 50082-2)

4.6.3 Mechanical protection

n IP40 protection rating (as per IEC 529) with jaws closed and IP30 with jaws open
4.6.4 Auto-extinction
n Jaws and housing: V0 (as per UL 94)
For maintenance, use only specified spare parts. The manufacturer will not be held
responsible for any accident occuring following a repair done other than by its After Sales
Service or approved repairers.
5.1

Cleaning

The clamp must not be clamped to a cable and must be disconnected from the measuring device. Do not
splash water onto the clamp.
n Keep the jaw gap perfectly clean. Remove dust with a dry, soft cloth. Wipe the iron jaws from time to
time with an oil soaked cloth, in order to prevent rust from forming.
n Clean the unit with a cloth and a little soapy water. Rinse with a damp cloth. Then dry quickly with a
cloth or pulsed air at 70°C max.
5.2

Metrological verification

n It is essential that all measuring instruments are regularly calibrated.
For checking and calibration of your instrument, please contact our accredited laboratories (list on
request) or the Chauvin Arnoux subsidiary or Agent in your country.
n Repairs under or out of guarantee : Please return the product to your distributor.

5. MAINTENANCE

15