Herunterladen Inhalt Inhalt Diese Seite drucken

Use; Characteristics; Reference Conditions; Specifications And References For Ordering - Chauvin Arnoux C1 Serie Bedienungsanleitung

Ac zangenstromwandler
Vorschau ausblenden Andere Handbücher für C1 Serie:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

Limit the measuring time between 1000 and 1200 A : 15 minutes on, followed by 30 minutes off.
With the C100 model, which is not protected by an output limiter, do not clamp a conductor before
connecting the clamp to the corresponding measuring device. Likewise, do not disconnect the clamp
from the measuring appliance when the clamp is still attached to the cable.
n Before connecting the clamp to the multimeter, check that the multimeter has an appropriate calibre.
n Open the jaws and clamp the cable through which the current you wish to measure is running.
Roughly centre the cable in the jaws. Follow the direction of the arrow, if so required by the application
in question.
n To read the measurement, apply the appropriate reading coefficient (See 4.2 "Input/output ratio").
NB : for multi-calibre models, select the ratio which provides the best resolution and precision.
4.1

Reference conditions

n Temperature
n Humidity
n Conductor centred in jaws
n Sinusoidal current
n Distortion factor
n Direct current
n Continuous magnetic field
n Alternating magnetic field
n Proximity of external conductors : no current
n Measuring device impedance
- C100 / C102 / C103 : £ 5 W
- C112 / 113
- C122 / C148
4.2

Specifications and references for ordering

Reference
Model
for
ordering
Alternating current output
C100
P01.1203.01
C102
P01.1203.02
C112
P01.1203.14
C103
P01.1203.03
C113
P01.1203.15
C122
P01.1203.06
C148
P01.1203.07

3. USE

4. CHARACTERISTICS

: +20... +26°C
: 20... 75% RH
: 48... 65 Hz
: < 1%
: no
: earth field (< 40 A/m).
: no
- C106 / C107 / C116 / C117 : ³ 1 MW and £ 100 pF
: £ 1 W
- C160
: £ 0.2 W
- C173
Nominal
measuring
scope
100 mA... 1000 A
10 mA... 1000 A
100 mA... 1000 A
10 mA... 1000 A
1 A... 1000 A
1 A... 1000 A
Input/Ouput
ratio
1 mA~ / 1 A~
1 mA~ / 1 A~
5 mA~ / 1 A~
5 mA~ / 1 A~
10 mA~ / 1 A~
20 mA~ / 1 A~
11
: ³ 1 MW and £ 47 pF
: ³ 10 MW and £ 100 pF
Ouput
Connec-
protected
tion
against
voltage surges
Sockets
No
Sockets
30 V
Leads
max. peak
Sockets
Sockets

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

C160P01120308

Inhaltsverzeichnis