Cancelling The Delay Start; Interruption Of A Washing Programme; Cancelling The Washing Programme; End Of The Washing Programme - AEG GS45BV220 Benutzerinformation

2. Make sure that the appliance is in setting mode.
3. Set the washing programme.
4. Press the delay button again and again until the display shows the time of the delay
start.
• The time of the delay flashes in the display.
• The delay indicator is on.
5. Close the appliance door, the countdown starts automatically.
• When the countdown is completed, the washing programme starts automatically.
The opening of the appliance door interrupts the countdown. When you close the door, the
countdown continues from the point of interruption.

Cancelling the delay start

If the appliance door is open, and the countdown has not started
1. Press the delay button again and again until the display shows the time of the washing
programme.
• The time flashes in the display.
2. Close the appliance door, the washing programme starts automatically.
If the appliance door is closed, and the countdown operates
1. Open the appliance door.
2. Press the delay button again and again until the display shows the time of the washing
programme.
3. Close the appliance door, the washing programme starts automatically.

Interruption of a washing programme

• Open the appliance door.
– The washing programme stops.
• Close the appliance door.
– The washing programme continues from the point of interruption.

Cancelling the washing programme

If the washing programme has not started, you can change the selection.
To change the selection while the washing programme operates, it is necessary to cancel
the programme.
1. Press and hold at the same time, function buttons (B) and (C) until all the programme
button indicators come on.
2. Release function buttons (B) and (C). The set programme is cancelled.
Make sure that there is detergent in the detergent dispenser before you start a new wash-
ing programme.

End of the washing programme

When the washing programme is completed, an intermittent acoustic signal sounds.
1. Open the appliance door, the display shows a zero.
2. Deactivate the appliance.
For better drying results, keep the appliance door ajar for some minutes.
Select and start a washing programme
77