Startup - K-FEE LATTENSIA Betriebsanleitung

1 2
Before starting up the Insert the milk foam-
machine, check the ing unit on the steam
voltage on the type outlet.
plate (see underside of
machine).
5 6
Re-insert the water Switch the machine
tank. on.
The rotary switch
must be set to "drink
dispensing".
3
Take out the water
tank.
7
On
Close the lever
completely. Place a
container under the
spout.
4
Fill the tank with fresh
water.
8
Press rinse button. The
rinsing process starts.

Startup

Read the safety in-
structions before
starting up the ma-
chine (p. 40 – 44).
If the machine was ex-
posed to temperatures
below freezing, please
wait at least 3 hours before
switching it on so that it can
warm up to room temperature.
When the machine is frozen or
very cold it is possible that it
does not function properly.
Risk of scalding!
Very hot water.
Before using the ma-
chine for the first
time, run 4 rinsing cy-
cles. To do that, press the rinse
button once the previous rins-
ing process has been complet-
ed. When using a water filter,
please read the instructions on
page 51.
EN
49