avidsen YLVA 2+ Handbuch Seite 32

D - UTILIZATION
4 - ACTIVATE THE VIDEOSURVEILLANCE
CAMERA (REF. 112248)
After connecting a surveillance videocamera to the
monitor (see paragraph "Electric connection") press
the monitor button
videosurveillance camera: the image will appear on
the display screen.
5 - INTERCOMMUNICATING FUNCTION
You can use the Intercom function to start an internal
communication with the Slave monitor (if present).
This function can be used with monitors in stand-by
mode: press the Master Monitor button
a call to the Slave monitor and vice versa. The user
can answer pressing the button
max. 120 sec, afterwards the terminals will return to
a stand-by mode.
Note that with an ongoing communication between
monitor (A) and an outdoor unit (Y), If you start
an intercom call, the communication between
(A) and (Y) will stop in favor of Master and Slave
intercommunication. At the end of the call, you can
resume communication with the outdoor unit as
described in par. "Activating outdoor units from the
monitor".
14
GB
to activate/deactivate the
to make
and can talk for
2-WIRE VIDEO COLOR ENTRYPHONE
6 -SETTING MONITOR'S FUNCTIONS
With monitor in stand-by mode, press the key
display the following screen:
Press again the button
(which lights up from time to time when selected).
• BRT :
Brightness : press the buttons
or decrease the image brightness
• CON :
Contrast : press the buttons
or decrease the image contrast.
• COL :
Color : press the buttons
decrease the image saturation level.
• CALL :
Microphone volume : press the buttons
to increase or decrease the microphone volume.
• INCOME :
Ringtone volume : press the buttons
increase or decrease the ringtone volume.
• RING :
Ringtone Selection : press the buttons
to choose the ringtone as desired.
to
to browse the submenu
and to increase
and to increase
and to increase or
and
and to
and