Musway M6v2 Bedienungsanleitung Seite 14

ENGLISH
INITIAL SYSTEM START-UP
DSP software download:
www.musway.de/dsp
• Download and save the MUSWAY DSP software before connecting the amplifier to your personal computer.
• Install the amplifier in your vehicle before you connect a computer to it .
• Turn the ignition key to the ACC or ON position.
• Connect a PC/Laptop with the USB terminal of amplifier by using the enclosed USB cable.
• After you have open the DSP software, you can set/adjust all the audio settings on the computer.
• The amplifier is on when the logo on the top lights up in orange. After 10 seconds it becomes operative.
BEFORE YOU FIRST USE THE UNIT
When you first use the unit, set the following:
Turning Power On
Setting the Speaker System
Setting the Input Configuration
Audio Adjustment
WARNING
Before turning on the sound system, check again carefully the configuration of the cross-
overs , the speakers setup. Wrong type of crossover or inappropriate parameter may cause
permanent damages on the speakers, especially tweeters without passive crossovers.
14
Recommended specifications:
CPU: 1.6 GHz or higher
Memory: 1 GB or higher
HDD: 512 MB or more
available space
Display: 1024×576 or higher
OS: Microsoft™ Windows XP,
Vista, 7, 8 or higher