Registering A Dect Handset To The Comfortel Ws-400 Ip; Activating The Comfortel Ws-400 Ip Multicell Server License - Auerswald COMfortel WS-400 IP Inbetriebnahmeanleitung

Commissioning
Further steps
Set up additional DECT handsets.
Register the DECT handsets to the COMfortel WS-400 IP.
Registering a DECT handset to the COMfortel
WS-400 IP
1.
Switch on the DECT handset.
2.
In the Handset, enter the access code under AC code (e. g.
1234).
3.
Scroll to User ID and enter the User ID (username/exten-
sion), e. g. 100.
4.
Press the OK soft key.
The handset is now logged onto the DECT system.
Note: See the instructions for the DECT handset for further infor-
mation.
Activating the COMfortel WS-400 IP multicell
server license
Requirements
– License key for multicell server activation
1.
Open the Administration > License page.
2.
Enter the multicell server license key in the License entry
field.
3.
Click Load.
The COMfortel WS-400 IP multicell server license is ac-
tivated.
Note: If you reset the COMfortel WS-400 IP to factory settings
(reset button pressed for more than 5 seconds), you have to
insert the license key again.
Further steps
Configure a COMfortel WS-Base multicell base (see the
instructions for the COMfortel WS-Base).
32
COMfortel WS-400 IP - Setup V03 04/2014