Commissioning
This section describes how to commission the COMfortel WS-
400 IP. This includes how to connect the device, how to log onto
the Configuration Manager, and how to set up an initial configu-
ration.
Commissioning overview
1.
Connecting the COMfortel WS-400 IP
2.
Opening the Configuration Manager
3.
Configuring the COMfortel WS-400 IP
Network settings
Security settings
SIP settings
Configuring a DECT handset
4.
Registering a DECT handset to the COMfortel WS-400 IP
(page
32)
5.
Activating the COMfortel WS-400 IP multicell server license
(page
32)
Default settings when the equipment is supplied
–
Access data for the Configuration Manager :
User name: admin
Password: admin (password before firmware version 14A:
ip6000)
–
Network settings:
DCHP enabled
–
Network addresses (If no DHCP server is available in the
network):
IP address: 192.168.0.1
Network mask: 255.255.255.0
Connecting the COMfortel WS-400 IP
Requirements
–
Patch cable
1.
Insert one of the patch cable's plugs in the RJ45 socket on
the front of the device.
2.
Insert the plug on the other end of the patch cable into a net-
work socket with PoE power.
28
Commissioning
(page
(page
(page
30)
(page
(page
30)
30)
(page
31)
COMfortel WS-400 IP - Setup V03 04/2014
28)
29)