Proper Use - Auerswald COMfortel WS-400 IP Inbetriebnahmeanleitung

Only use original accessories and original replacement parts.
Contract a professional to complete any necessary repairs
without delay. Please contact your qualified electrician or the
manufacturer directly.
Do not touch the contact points with pointed, metallic or damp
objects.
Do not carry the device by its connection cables.
Warning: Power surges, which can occur during electri-
cal storms, can cause life-threatening electric shocks or
damage/destroy the device.
Do not connect or disconnect power cables during an electri-
cal storm.
Arrange for a qualified electrician to lay all the cables inside
the building.
Protect the devices by installing over voltage protection.
Warning: When using Power over Ethernet (PoE) elec-
trical circuits, there may be a risk of electric shocks if con-
nections are set up using non-insulated, exposed metal
contacts, conductors, or terminal clamps.
Avoid setting up such connections, except if the exposed
metal contacts are installed in areas that have restricted
access. A restricted access area can only be accessed by
using a special tool, lock and key, or other means of security.
In addition, persons who have been granted access to these
areas will have been explicitly informed of these hazards.

Proper Use

Important: Auerswald products are not designed, manufactured,
or intended for use in environments that require fail-safe perfor-
mance, such as in the operation of life-support systems and/or
nuclear facilities. Our products can only be used for these pur-
poses with prior written permission from Auerswald in each indi-
vidual case.
Important: Improper use may, for example, cause functional
restrictions or malfunctions, the destruction of the device or, in a
worst case scenario, personal injury.
If you are still uncertain about how to use the product properly
after reading the section below, please contact your special-
ised dealer.
COMfortel WS-400 IP - Setup V03 04/2014
Important Information
21