Operation
Thank you for choosing a Testavit
Power socket tester with FI/RCD test (30 mA).
|
Power socket test
The Testavit
to determine right or wrong
connection of the wires in power
sockets and shows the results
with an optical indication.
Please find the failure indication in
the below table.
With using the „FI/RCD-Test"
button (less than 3 seconds) you
are able to trigger the residual
current device (30 mA at 230V
AC).
In order to obtain a correct
indication and to carry out the
FI/RCD test, the right phase must
be applied.
®
Testavit
Schuki
®
®
Schuki
1A is able
®
1A
®
®
Schuki
1A.
Operation
21