Operation; Menu Structure - EuroLite LED Color Curtain Bedienungsanleitung

1 Connect the device via the mains cable to a grounded mains socket. Thus the unit is switched on.
2 To switch off the unit, disconnect the power plug.
3 Do not connect the unit to the mains voltage via a dimmer. For a more convenient operation, use a mains
outlet which is switchable.
4 The jack POWER OUT allows for power supply of further devices. To interconnect several devices,
connect the jack POWER OUT to the input POWER IN of the next unit until all units are connected.
Matching power cables are available as accessories. In this manner, up to 8 devices can be linked at
230/240 input voltage and up to 4 devices at 110/115 input voltage.

OPERATION

After connecting the device to the mains it is ready for operation. The display indicates the last operating
mode. The operating modes can be selected by means of the display and the control buttons. All settings
remain stored even if the device is disconnected from the mains. The device can be operated in stand-alone
mode via the control board or in DMX-controlled mode via any commercial DMX controller.

Menu structure

Mode
DMX operation
Master/slave mode
Color mixing
Color mode
Strobe effect
Display
Addr d001-512
ChПd
SLAU
SLПd
r000-255
g000-255
Пaun
b000-255
U000-255
Co1-15
Au00-99
Пode
FA00-99
SU00-99
Stro SU00-99
18/24
Set starting address
4 CH 4-channel mode
8 CH 8-channel mode
Slave mode
ПASt Master mode
Red 0-100%
Green 0-100%
Blue 0-100%
White 0-100%
Constant light in 1 of 15 colors
Color change, slow > fast
Color fade, slow > fast
Sound control with adjustable
microphone sensitivity, low > high
Strobe effect, slow > fast
Function
00127706, Version 1.0